Author Archive

The Elements of a Quality Paint Specification

Breaking Down Paint Specifications

The paint specifications sheet will determine the entire scope of any coating project. Specifically, for a painting project, this is broken down into three broad categories; the product to be used, the surface preparation required and how the product should be applied.

As mentioned in our previous post on how to write paint specifications, a specification’s worth is largely a matter of detail. Instructions must be detailed enough to avoid misunderstandings between the contractor and the owner, while not being unnecessarily restrictive. The following are details that may be included for each category of the specification.

The Product

“Sole spec” sheets are written specifically for a certain product. This is a situation where “shall” or an equally stern term will be used to refer to the product to be used. In some instances, such as federally funded projects, sole spec sheets are not permitted. In these instances, a few options may be provided, or “may” will be used to indicate a tolerable substitute. Here a product may be referred to as “trade name or equal”. This section will also likely specify any unique product formulations the project requires. For instance, if strict VOC regulations are a concern, this section could stipulate a high solids or even 100% solids formulation.

Surface Preparation

The most commonly accepted industry standards pertaining to surface preparation were devised by the Society for Protective Coatings (SSPC) and the National Association of Corrosion Engineers International (NACE). These are the gold standard for measuring the readiness of a surface to receive a coat of paint. These surface preparation standards range from SP1 to SP14, though a higher number does not necessarily indicate a higher level of surface cleanliness. Each standard indicates the method of cleaning as well as criteria for evaluating the outcome. For instance, an SP5/NACE 1 level of surface preparation is a white metal blast cleaning “that should leave the surface free of visible oil, grease, dust, dirt, mill scale, rust, coating, oxides, corrosion products and other foreign matter.”

Because surface preparation is such a tremendously important step in the process (improperly preparing a surface is a surefire way to shorten the coating’s service life) spec sheets must either stipulate the required level of surface preparation or direct the contractor to a product data sheet that does so.

Application

This is another section of the spec sheet that should heavily reference specific product data sheets. The ambient conditions, number of coats and mil thickness required for a successful application should be spelled out in that document.

The specification sheet should also specify the method to be used during application. If a specific formulation, such as a 100% solids formulation is called for, then this section should also include any notes on required application equipment such as plural component pumps. The contractor should also be made aware of any other challenges that may arise during the application process in this section of the specification sheet.

Your paint specification sheet will specify what products are needed and how they need to be applied, as well as the surface preparation required for the job. These are the core elements of a paint specification, but to learn everything there is to know about paint specifications you can download our comprehensive guide below.

 

USC-paint-spec-blog-CTA

Author Archive

The Elements of a Quality Paint Specification

What are Paint Specifications?

Implementing corrosion protection for your facility all starts with one important document: your paint specifications sheet. Your paint specifications sheet will outline the entire course of your project. This document must clearly and concisely lay out the conditions and processes that will prevent corrosion and other harmful damages to your facility.

It is not a statement of how the project should look once completed, but rather a detailed explanation of the conditions necessary to achieve maximum service life and corrosion protection. Paint specifications are the project template, and if something is wrong with the template, the finished product simply won’t perform properly.

In the unfortunate event of a dispute between a contractor and a project owner, the project specifications will also likely be used to determine whether each party lived up to its responsibilities. This is just another reason to make sure your paint specifications are thorough and clear before a project gets off the ground.

How to Write Paint Specifications

Well-written paint specifications contain exactly as much detail as they need to make expectations clear and no more. Industrial coatings are more complex than they used to be, and paint specifications need to reflect that complexity.

At the same time, these specifications need to be unambiguous in order to avoid confusion about an owner’s expectations. It should be clear to a contractor that the owner expects all aspects of the document to be lived up to, or else any recommended changes should be clearly mentioned during the bidding process.

Clarity of the paint specifications will reduce the likelihood that a contractor’s work does not conform to expectations. A clear understanding between both parties will also reduce the probability that expensive change orders will need to be filed during the course of the work.

As mentioned before, specifications can act as legal documents in the case of a dispute, and any confusion resulting from unclear specifications may increase the risk of a breach of contract or a legal dispute.

But what are the actual elements of a specification document?

What exactly is being specified?

For answers to these questions and more info on who to talk to about paint specifications, download our whitepaper below.

USC-paint-spec-blog-CTA